ENOVEN E-SERIES

BODY: 10’ Long, 5.7 to 7.5 cubic yard capacity; 26” tall sides with 32” tall tailgate, 100% continuous welded

FRONT END: 32” tall 3/16” hi-tensile steel with 1” horizontal “V” brace, 20” cab protector, and 7ga hi-tensile steel full depth front corner pillars

SIDES: 26” tall 10 gauge hi- tensile steel outer panel with 3/16” hi-tensile steel inner panel. 6” sloping boxed top rail, 6” deep sloping bottom rail, 2” cheater board pockets, (1) horizontal “V” brace

TAILGATE: 32” tall 10 gauge hi-tensile steel outer panel with 3/16” hi-tensile steel inner panel. Dirt shedding top with standard 2-way operation, (1) horizontal “V” brace, 3/8” drop and spreader chains, 11” X 19” patch gate, and 8” bolt-on spreader apron

TAILGATE HARDWARE: Over center locking hardware with manual handle at left front of body

FLOOR: ¼” one piece hi-tensile steel with radius from side to floor

UNDERSTRUCTURE: 8” tall structural channel long sills, crossmemberless design

LIGHT SYSTEM: 6” Oval LED recessed grommet mounted S/T/T lamp in rear posts with 3/4” LED rear clearance and 2.5” LED rear side marker lamps. Three lamp ID bar above hitch plate

PAINT: Sandblasted, prepped, and cleaned. Primer painted with high impact resistant urethane light gray primer with a top coat of single stage urethane paint

HOIST: Champion under body, sub-frame mounted hoist. NTEA Class 60 rated at 22.1 tons with 50degree dump angle. Single body prop

RUGBY TITAN 10’ Dump 24” Sides

Rugby’s Titan Series Dump Bodies are designed to meet your bigger capacity, class 5-7 needs.

Titans feature a sleek yet strong look, a dirt-shedding top rail, 10 degree sloped tailgate and radius front corner posts.